STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2. Read and understand instructions completely before beginning installation. STEP 3.
Install Mount Brackets using bottom M10-1.25 x 25mm Hex Head Bolt, Flat Washer and Lock Washer. Leave loose. Figure 1.
STEP 4. Remove lower fascia mount screws located just to the outside of tow hooks. Pull fascia away slightly to access top bolt holes.
Figure 2. STEP 5. Fasten top of bracket using 10MM fasteners.
Figure 2. STEP 6. Mount Safari Bar using 1/2 d Fasteners.
Figure 3 and 4. STEP 7. Center and level Safari Bar.
Tighten and torque fasteners as follows. 10MM to 32 FT. LBS 1/2 d Fasteners to 65 FT.
LBS. 1MOUNT BRACKET, PASSENGER SIDEPHILLIPS SCREW DRIVER 1MOUNT BRACKET, DRIVER SIDE17MM SOCKET 21/2-13 X 2.00 d HEX HEAD BOLT3/4 d SOCKET 21/2 d SAE FLAT WASHER3/4 d WRENCH 21/2 d SPLIT LOCK WASHERTORQUE WRENCH 4M10-1.25 X 25MM HEX HEAD BOLTRATCHET 4M10 FLAT WASHER 2M10 LOCK WASHER PARTS KIT CONTENTS QTY DESCRIPTIONTOOLS REQUIRED 75-0193 Revision B 9/28/00 INSTALLATION INSTRUCTIONS APPLICATION:1996-00 TOYOTA RAV-4 SAFARI BAR ASSEMBLY 30-0000 30-0005 MOUNT KIT 30-1015 Finish protection - Westin products have a high quality finish that must be ... more. less.
cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax (pure carnauba, for example) on a regular basis.<br><br> The use of cleaner wax or any compound which contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion. Thank You for choosing Westin products For additional installation assistance please call Customer service (800) 793-7846 or (507) 375-3559 Westin Automotive Products, Inc. 5200 N.<br><br> Irwindale Ave. Suite 220 Irwindale, Ca. 91706 M10 FLAT WASHER M10 LOCK WASHER M10-1.25 X 25MM HEX HEAD BOLT RAV-4 FRONT FASCIA RAV-4 FRAME MOUNT BRACKET 1/2 d FLAT WASHER 1/2 d LOCK WASHER 1/2-13 X 2.00 d HEX HEAD BOLT FASCIA SAFARI BAR FRAME MOUNT BRACKET DRIVER SIDE PASSENGER SIDE FRONT TOYOTA RAV-4 FRAME MOUNT BRACKET M10 FLAT WASHER M10 LOCK WASHER M10-1.25 X 25MM HEX HEAD BOLT FIGURE 1 FRONT VIEW FIGURE 3 SIDE VIEW FIGURE 4 TOP VIEW FIGURE 2 SIDE VIEW<br><br>