Truck-Mounted Equipment

hp 10.616.7 Hydraulic EfA ciency @ 120° F 88.40%81.70% Hydraulic Pressure 3 psig 21002250 Dimensions Overall Length 3 in (mm) 28.1 (714)28.1 (714) Overall Width 3 in (mm) 21.7 (551)21.7 (551) Overall Height 3 in (mm) 19.1 (485)19.1 (485) Oil Capacity 3 oz (L) 50 (1.5)50 (1.5) Weight (wet) lb (kg) 360 (163)360 (163) Model VHP30RMHVHP40RMH Heat Rejection To Hydraulic Oil 3 BTU/hr 630015720 Oil Temperature Degrees Above Ambient 39° F59° F Model VHP30RMHVHP40RMH Heat Rejection To Hydraulic Oil 3 BTU/hr 1890029100 Compressor Drive " Conservatively designed, extended life, dual cB dsection belt drive system " Convenient belt tension adjuster bolt for future belt tensioning if needed " Gear-type motor with case drain feature; motor has integral pressure bypass, solenoid bypass valve (for unit on/off control) and coast down check valve; closed-circuit version has a load sense port to signal variable displacement pump Cooling " 14", 12-volt DC electric, straight blade, high-efJ ciency cooling fan " Built-in hydraulic air cooler " Cooling air enters through fan, exits through cooler Instrumentation " Compressor oil level sight gauge " Discharge pressure gauge " Hour meter (records pump run time only 3 fan can run without adding hours) " Ratcheting, resettable air cleaner restriction indicator Air Cleaner " High-efJ ciency, heavy-duty dual stage air cleaner with replaceable element Service Outlet " One 1/2" FNPT connection and -4 air pressure sense port for connection to receiver Hydraulic Connections " -8 inlet and outlet, -4 case drain, -4 pressure sense (on closed- center hydraulic models) Miscellaneous " 12-volt DC output signal for speed control idle-back feature " Conveniently located service panels for all routine materials " Discharge temperature shutdown switch " Easy access drain for compressor oil " High quality e-coat primer and powdercoat J nish inside and out " Internal vibration isolation of compressor pump and drive system " Lifting provisions at four corners of frame base Truck-Mounted Equipment Above-Deck Air Compressors HP60CMH and VHP90CMH speci9 cations Rotary screw compressor modules, 60-90 cfm @ 80 3 175 psig Model HP60CMHVHP90CMH Performance Characteristics Rated Air Capacity 3 cfm (m 3 /min) 60 (1.70)90 (2.55) Pressure Range 3 psi 80 3 15080 3 175 Compressor Type Single-stage, Rotary Screw Single-stage, Rotary Screw Compressor Input Speed 3 rpm 71152800 Discharge Air Outlet Size NPT in (mm) 0.75 (19.05)0.75 (19.05) Oil Capacity 3 gal (L) 1.0 (3.79)2.0 (7.57) Hydraulic Speci9 cations Hydraulic Flow Required 3 gpm (L/min) 18.1 (68.5)29.5 (111.7) Hydraulic Pressure @ Full Load 3 psig (bar) 2295 (158.2)2520 (173.7) Hydraulic Motor Speed @ Full Load 3 rpm 25002800 Theoretical Hydraulic Power Required 3 hp (kW) 24.2 (18.0)43.3 (32.3) Heat Rejection to Hydraulic Oil @ Full Load 3 BTU/hr (kW) 19320 (5.7)n/a Hydraulic Oil Temp (degrees above ambient) 3 °F (°C) 48 (26.7)n/a Hydraulic Connections Inlet -12 JIC-12 JIC Outlet -16 JIC-12 JIC Case Drain -4 JIC-4 JIC Load Sense (closed center version) -4 JIC-4 JIC Dimensions Overall Length 3 in (mm) 28.7 (729)28.5 (724) Overall Width 3 in (mm) 21.9 (557)20.6 (523) Overall Height 3 in (mm) 23.6 (600)22.0 (559) Weight Shipping Weight 3 lb (kg) 328 (149)328 (149) Working Weight 3 lb (kg) 336 (152)342 (155) Package Features for HP60CMH & VHP90CMH " Built-in hydraulic cooling (HP60CMH only) " Easily serviced, replaceable air cleaner cartridge " Conveniently located service panels for all routine maintenance " Remote, easy-access compressor oil drain " No-spill, spin-on separator element and oil J lter " Stepless regulation system " Full enclosure with high-quality powdercoat paint J nish " SimpliJ ed internal piping; oil temp bypass valve, min pressure valve, scavenge method, oil J lter, and air/oil separator element are combined in one apparatus " Elastomer coupling between motor and airend (VHP90CMH only) " Choice of gauge panel location for driver or passenger side mounting (VHP90CMH only) " 12-volt output signal to activate vehicle throttle control (HP60CMH only) Compressor Features " 100 percent continuous duty rating " Oil-K ooded, rotary screw airend designed and manufactured by Ingersoll Rand " Integral air/oil separation system built into compressor casting (HP60CMH only) Hydraulic System Features " Gear-type, hydraulic motor with case drain " Hydraulic pressure relief valve built into system (3500 psi) " Coast-down anti-cavitation check valve included (HP60CMH only) " Permanent precision alignment of hydraulic motor, coupling, and airend for extended coupling life (VHP90CMH only) Instrumentation " Discharge air pressure gauge " Discharge air temperature gauge (VHP90CMH only) " Hour meter " Compressor oil level gauge " Air cleaner restriction indicator Safety " ASME pressure relief safety valve " Minimum pressure device " Automatic blowdown valve " OSHA fan guard (HP60CMH only) " High-discharge air temperature shutdown system Capacity (cmf) 175 psi150 psi125 psi100 psi Hydraulic B ow Hydraulic Pressure (psig) 30 28 26 24 22 20 18 16 14 12 10 2,600 2,500 2,400 2,300 2,200 2,100 2,000 1,900 1,800 1,700 1,600 2030405060708090100 Hydraulic Flow (gpm) Hydraulic Pressure Requirements vs.<br><br> Capacity - VHP90CMH (per compressor discharge pressure) Experience Doosan Infracore Portable Power and our industry-leading support and service. Whatever the job, Portable Power has t he solution. From our comprehensive range of Ingersoll Rand air compressors, lighting systems and generators to our rugged and rel iable light compaction and concrete equipment, we have a solution to A t your needs.<br><br> Running a successful business takes more than po werful equipment. That 9s why Portable Power partners with an experienced global dealer network to stand beside you every step of the w ay. Portable Power 4 more than 100 years of providing excellence.<br><br> (877) 472-7263 doosanportablepower.com Doosan Infracore Portable Power 9s air compressors are not designed, intended, or approved for breathing air. Compressed air sho uld not be used for breathing air applications under any circumstances. Product improvement is a continuing goal at Doosan Infracore Portable Power.<br><br> Designs and speciJ cations are subject to change w ithout notice or obligation. Nothing contained in this brochure is intended to extend any warranty or representation, expressed or implied, regarding the products d escribed herein. Any such warranties or other terms and condition of sales shall be in accordance with standard Doosan Infracore Portable Power terms and conditions of sale for such products, which are available upon request.<br><br> © 2009 Doosan Infracore International, Inc. 27-0024 Performance Features 4 Reciprocating Models " 100 percent continuous duty " Available for most open-center or closed-center hydraulic systems " Best value 4 highest air volume (cfm) and pressure in its class " Built for durability and reliability " Extended air pump warranty (up to two years) available with use of Ingersoll Rand All Seasons Select lubricant " Air storage tank kits available as an accessory (10- & 22-gallon) Performance Features 4 Rotary Screw Models " 5-year / 10,000-hour extended airend warranty available " Continuous airK ow eliminates need for air storage tank " Cost-effective 4 more air volume (cfm) for your dollar " Instant power upon arrival " More air volume (cfm) per square foot of mounting area " Onboard air allows hitch to be available for towing equipment " Hydraulic cooler available as an accessory option (VHP90CMH only) Model VHP30RMHVHP40RMH Reciprocating Max cfm 3 cfm (m 3 /min) 30 (0.84)40 (1.13) Max psi 3 psi (bar) 175 (12.06)175 (12.06) Hydraulic 3 gpm (L/min) 8.6 (32.55)12.7 (48.07) Hydraulic 3 psi (bar) 2100 (144.78)2250 (155.13) Dimensions Length 3 in (mm) 28.1 (714)28.1 (714) Width 3 in (mm) 21.7 (551)21.7 (551) Height 3 in (mm) 19.1 (485)19.1 (485) Weight (wet) 3 lb (kg) 360 (163)360 (163) Weight (dry) 3 lb (kg) 357 (162)357 (162) Model HP60CMHVHP90CMH Rotary Screw Max cfm 3 cfm (m 3 /min) 60 (1.70)90 (2.54) Max psi 3 psi (bar) 150 (10.34)175 (12.06) Hydraulic 3 gpm (L/min) 18.1 (68.5)29.5 (111.67) Hydraulic 3 psi (bar) 2295 (158.23)2520 (173.74) Dimensions Length 3 in (mm) 28.7 (729)28.5 (724) Width 3 in (mm) 21.9 (557)20.6 (523) Height 3 in (mm) 23.6 (600)22 (559) Weight (wet) 3 lb (kg) 336 (152)342 (155) Weight (dry) 3 lb (kg) 328 (149)328 (149)

less