www.stkate.edu/internal/helpdesk.nsf | firstname.lastname@example.org |651-690-6402 June 15, 2009 Page 1 Connecting HP Laptops to Projectors Plug laptop into network connection. S TEP 1 : Right-click on desktop S TEP 2: Click on ATI CATALYST Control Center After step 2, this is what you will see. If Displays Manger is not on top, click on the link on the left.
S TEP 3: Right-click on the 2 and left click on Enable. Choose Yes to save the setting change. Note the attached display is currently disabled .
The data projector is now in the Extended mode. You must change it to Clone to show your PowerPoint. www.stkate.edu/internal/helpdesk.nsf | email@example.com |651-690-6402 June 15, 2009 Page 2 S TEP 4: Right-click on the Desktop 2 icon and s elect Clone Desktop 1 with monitor Choose Yes to save the setting Click on Yes Press Apply and OK to close the window.
Set the display area to 1024 X 768 Press Apply and OK to close the window. You should now be displaying the same screen on both your laptop and the projector You may need to use the Function key to toggle through the display options Press Function + F4 You can select only on your laptop, ... more. less.
only on the projector or on both laptop and projector