Contour HD Wearable Camcorder User 9s Guide About the Camera SD HD a Power Button b Battery Status c Record Button d Rotating Lens e Record Status f Memory Status a HD/SD Switch b USB c Charge Indicator d Battery Latch e Battery Slot f MicroSD Card a b c d e f a b c d f e " Open the back door. " Insert battery with (+) aligned and close orange latch. " Align back door slightly above camera and slide down until it locks in.
Getting Ready " Push and hold power button (1 second) to turn on. " You are ready to record Note: Power up with record switch forward to enable silent mode. Power Up " Start recording: slide switch forward.
" Stop recording: slide switch back. Record start stop thumb tab Share " Turn camera on and connect to computer with USB cable. " Install VholdR Desktop directly from MicroSD card provided or download at: www.VholdR.com/support/software.
" Import, clip and share your videos& Note: HD is beautiful but some computers cannot play smooth HD video. Visit www.vholdr.com/support for the latest information on computer requirements. Flat Surface Mount " Unhook leash on base and loop through camera.
" Slide ... more. less.
camera onto rails until it clicks. side of helmet recommended). " Hold base, pull camera away, rotate to align, and press into mount to reattach.<br><br> Goggle Mount " Slide camera on rails until it clicks. " Press thumb on large tab (top of mount) and pull camera away. " Slide goggle strap into base.<br><br> " Align vertical angle of camera. " Snap rails back into mount over strap. Align " Press power button to activate lasers.<br><br> " Aim at your hand, a wall, or other object. " Rotate lens to align lasers horizontally. " Remove and reorient mount rails to adjust mount angle.<br><br> Aim a little high for the best shot. Resolution Settings " Use switch under back door to select video resolution. HD: Amazing Clarity 1280 x 720 at 30fps 30 min avg record time/GB SD: Fast Action 848 x 480 at 60fps 60 min avg record time/GB " 2GB microSD card included.<br><br> Accepts up to 16GB microSD (SDHC Compatible) card. Power Recharge " Connect to computer with USB cable. " Red light indicates charging.<br><br> " Charge complete when camera beeps " Press and hold power button 3 seconds. 15 min of inactivity. Status Press power button to check status.<br><br> " Memory / Battery Available Green > 80% | Yellow 20-80% | Red <20% " Record Status Green = ready | Red = recording Flashing = memory full or corrupt Error Conditions " Memory full: (3) beeps, recording stops. " No beeps: camera in silent mode. We are here to help Keeping Shoot and Share simple is what we are all about.<br><br> We would love to help you have a great ContourHD experience so please contact us with any quesitons you have. Hours: Monday - Friday (9am to 6pm PST) Toll Free: 866.397.6920 (USA) International: 206.792.5226 Email: email@example.com Web: www.vholdr.com/support