SE CONS SDI Diagnostics Interface Installation and Operation Manual

temperature are not utilized near automotive batteries. Automotive batteries contain sulfuric acid and produceexplosive gases.<br><br> Ensure a safe distance from all moving engine components during servicing. Test equipment, clothing, and parts of your body can beseriously damaged or injured. An operating engine produces carbon monoxide which is an odorless, colorless, poisonous gas that can lead to serious injury or death.<br><br> Always service an operating engine in a well ventilated area. Usage guidelines Never run diagnostics software for different brand on your vehicle (e.g. running Ford diagnostic software on a Mercedes-Benz car).<br><br> This may cause major damage to your SDI interface and such action voids your warranty.. The SDI Interface is designed for 12-volts only vehicles. Although the SDI Interface contains protection circuits, please verify if the OBD2 connector is properly connected and no pins are short-circuited to battery before performing diagnosis.<br><br> Never try to disassemble the SDI Interface. It does not contain any user serviceable parts. Removing SDI Interface cover voids your warranty.<br><br> SECONS SDI Diagnostics Interface Manual SDI Interface drivers installation Drivers have to be installed before the SDI interface is first time plugged to your computer. Launch dpinst.exe from the installation CD-ROM. The following screen shoud display: Click on Next button.<br><br> Windows XP and later will display warning about driver's signature. Don't care about it, our drivers are fully tested to work on Windows 2000 and later. Click on e Continue Anyway c.<br><br> SECONS SDI Diagnostics Interface Manual Now you have successfully installed SDI Drivers and you can plug-in the SDI interface to the computer and connect it with a vehicle. Drivers removal If you want to remove SDI drivers from your computer, click on eStart menu c, then choose eSettings, Control panels c and then click on eAdd or remove programs c. This window should appear on your screen: Please select eWindows Driver Package 3 SECONS SDI Driver Package c and click on eChange/Remove c.<br><br> Then you will be asked if you really want to remove the drivers, click on eYes c: Now the drivers are uninstalled from your computer. SECONS SDI Diagnostics Interface Manual SDI Protocol and Vehicle Bus listing The SDI Interface supports all major standards for vehicle diagnostics. These physical layers are supported: ISO9141 K-Line (28x) L-Line CAN-BUS High-Speed Low-Speed (Fault-Tolerant) Single-Wire J1850 bus VPW (GM vehicles) PWM (Ford vehicles) Diagnostic protocol listing: KW71/KW1281 KWP2000, PSA2000 Renault ISO Peugeot ISO VW TP2.0 ISO 15765 OBD2 (ISO9141, ISO14230, ISO15765, VPW, PWM) Ford ISO protocol Opel KW82 BMW DS-1, BMW DS-2 KWP2000 STAR BMW FAST<br><br>

less