ISO 9004 and ISO 14000 standards. Aftermarket products are also covered by Brembo Warranty and carry AB/TÜV certi cation from the German Federal Road Safety Of ce.<br><br> Top vehicle makers use Brembo Brembo produces original equipment braking systems for the top vehicle makers: Aston Martin, Audi, BMW, Cadillac, Chrysler, Ferrari, Ford, General Motors, Honda, Jaguar, Jeep, Land Rover, Mercedes-Benz, Mitsubishi, Nissan, Porsche, Subaru, Volkswagen, to name a few. Brembo High Performance The experience accumulated through years of intensive research in the competition eld has allowed us to create product lines that are differentiated on the basis of the application types and different research and development procedures adopted. Thanks to the results obtained, car sports enthusiasts who insist on replacing original brake systems with Brembo High Performance equipment are able to improve their riding style in terms of performance and safety while also ramping up the overall aesthetic appeal of their machines.<br><br> 2 3 4 5 TWO-PIECE ROTOR APPLICATIONS The Gran Turismo system 9s level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers and discs, thermal capacity and brake torque is increased. This potent combination offers the extreme in Brembo 9s leading edge technology for high performance street or track use applications.<br><br> " Brembo 2, 4, 6, or 8 piston calipers (depending on applications) with sequentially sized pistons; includes color choices of red, black or silver calipers " Brembo two piece c oating d hat and rotor assemblies reduce unsprung and rotating weight and dissipate heat faster " Brembo drilled or slotted two piece discs up to 16 d (405 mm) " Stainless steel braided brake lines: DOT/TÜV approved " Brembo high performance brake pads " Brembo c oating d anti-rattle disc hardware " Brembo billet caliper mounting brackets. " Most of GT applications comes with TÜV Certi cation * Brembo brake systems are fully compatible with ABS and traction control system. All of the necessary hardware is included to insure seamless installation.<br><br> 6 ONE-PIECE ROTOR APPLICATIONS Gran Turismo one piece rotor systems offer a cost effective solution to the high performance brake upgrade. Includes oversized calipers and discs for increased brake torque and thermal capacity. These performance upgrades are available for many European, domestic and import vehicles.<br><br> " Brembo 2 or 4 piston calipers (depending on applications) with sequentially sized pistons. Includes color choices of red, black or silver calipers " Brembo drilled or slotted one piece disc up to 14 d (355mm) " Stanless steel braided brake lines: DOT/TÜV approved " Brembo high performance brake pads " Brembo billet caliper mounting brackets " Most of GT applications comes with TÜV Certi cation * Brembo brake systems are fully compatible with ABS and traction control system. All of the necessary hardware is included to insure seamless installation.<br><br> GRAN TURISMO BRAKE KIT 7 8 2 PIECE RADIAL CALIPERS - Lightweight 2 Piece Aluminum Alloy Body - Quick Release Pad System - Sequentially Sized Pistons - Radial Mount Design 4 PISTON CALIPER 3 A, F " Fits discs up to 328 x 28mm " Fits on Acura NSX/RSX/TSX, Audi A3/A4/ TT, BMW 3 Series, Ford Focus SVT, Honda Civic Si/S2000, Lexus IS300, MIstubishi Eclipse, Mazda Miata/RX8, Subaru WRX, Volkswagen Golf/Jetta/GTI " Available in Red, Silver and Black 4 PISTON CALIPER 3 B, H " Fits discs up to 380 x 32mm " Fits on Audi S4, BMW M3, Chevy Corvette C5/C6, Dodge Viper/Magnum/ Charger/300C, Ford Mustang/Cobra, Ferrari 550/575, Mistsubishi Lancer Evo 8/9, Nissan 350z/G35, Porsche 993/996/997, Subaru STi, Toyota Supra " Available in Red, Silver and Black 4 PISTON CALIPER 3 C " Fits discs up to 345 x 28mm " Fits on Rear Applications - Audi A4/S4, BMW M3/3/5/7 Series, Chevy Corvette, Dodge Viper/Magnum/Charger/300C, Ferrari 550/575, Mercedes CLS/E/S/SL, Mitsubishi Evo 8/9, Porsche 993/996/997, Toyota Supra " Available in Red, Silver and Black 6 PISTON SUV CALIPER - J " Fits discs up to 405 x 34mm " Fits on Cadillac Escalade, Chevy Tahoe/ Suburban/Avalanche, Dodge Ram 1500, Ford F150, GMC Yukon/Denali, Hummer H2, Range Rover Sport " Available in Red, Silver and Black 9 2 PIECE AXIAL CALIPERS - Lightweight 2 Piece Aluminum Alloy Body - Quick Release Pad System - Sequentially Sized Pistons - Axial Mount Design 4 PISTON COBRA R CALIPER - E " Fits discs up to 330 x 28mm " Only for Ford Mustang GT/Cobra " Available in Black only 2 PISTON REAR CALIPER - E " Fits discs up to 316 x 20mm " BMW 3 Series " Available in Red, Silver, Black and Gold PARKING BRAKE - D " Lightweight Aluminum Alloy Body " Single Piston " Axial Mount Design " Mechanical Operation " Available in Black only 10 MONOBLOC CALIPERS - Lightweight Monobloc 1 Piece Aluminum Alloy Body - Quick Release Pad System - Sequentially Sized Pistons - Radial Mount Design 4 PISTON MONOBLOC CALIPER - P " Fits discs up to 380 x 28mm " Fits on Rear Applications - BMW M3/M5/ M6, Chevy Corvette C5/C6, Mercedes, Porsche 996/997/Turbo/GT3/Cayenne, Range Rover " Available in Red, Silver, Black and Yellow 6 PISTON MONOBLOC CALIPER 3 M, N " Fits discs up to 405 x 34mm " Fits on Audi RS4, BMW M3/M5/M6, Chevy Corvette C6, Ford GT, Ferrari 360/430, Mercedes AMG CLS/E/S/SL, Porsche 996/997/Turbo/ GT3/ Cayenne " Available in Red, Silver, Black and Yellow 8 PISTON MONOBLOC CALIPER - G " Fits discs up to 380 x 34mm " Fits on Audi A8, BMW 5/X5/6/7/ Z8, Cadillac Escalade, Chevy Tahoe/ Suburban/Avalanche, Dodge Magnum/ Charger/300C, Ford F150, GMC Yukon/ Denali, Mercedes CLS/E/S/SL, Nissan Titan/Armada, Porsche Cayenne, Range Rover " Available in Red, Silver and Black 11 BREMBO BRAKE FLUID SPORT.EVO 500++ Formulated for the Enthusiast Brembo SPORT.EVO 500++ is a premium speci cation Motor Vehicle Brake and Clutch Fluid which conforms to and exceeds the current international speci cations U.S. FMVSS No.116 DOT 3 and DOT 4, SAE J1703, SAE J1704 and ISO 4925. Typical dry boiling point 271 Deg C., typical wet boiling point 169 Deg.C.<br><br> Brembo SPORT. EVO 500++ will mix safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch uids conforming to the above speci cations. Whilst Brembo SPORT.EVO 500++ is suitable for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based uid is speci ed, it has been specially formulated to meet the system performance requirements of the ENTHUSIAST upgrating the Braking System using a Brembo High Performance Kit.<br><br> Brembo SPORT.EVO 500++ is well suited to vehicles with ABS braking systems.For maximum safety and performance Brembo recommends that brake uid is changed every year. NOT SUITABLE FOR VEHICLES WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.<br><br> Usage " FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID. " KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.<br><br> " STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ABSORPTION OF WATER. " CAUTION.<br><br> DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS. Caution " IRRITATING TO EYES. " KEEP OUT OF REACH OF CHILDREN.<br><br> " CONTAINS POLYALKYLENE GLYCOLETHERS AND POLYGLYCOLS. DO NOT SWALLOW. If swallowed, call medical assistance immediately and show this container.<br><br> " AVOID SKIN AND EYE CONTACT. In case of eye contact ush with plenty of water for 10 minutes. If irritation persists, seek medical advice.<br><br> BRAKE FLUID WILL DAMAGE PAINTWORK. If spilt wash off immediately with plenty of water. Important notice: Be aware NOT to mix Brembo SPORT.EVO 500++ with other uids unless you follow the above technical speci cations.<br><br> 12 HIGHLY PROTECTIVE PACKAGING & COMPREHENSIVE INSTRUCTION MANUAL Only Brembo packages each of its components in tted foam insulation to ensure that each system reaches you in perfect condition. Comprehensive instruction manual included with every Brembo system. CALIPER MOUNTING BRACKETS & HARDWARE All caliper mounting brackets are precision milled from superior quality materials.<br><br> Each Brembo system includes all necessary hardware for installation. OPTIMUM BRAKE BALANCE Brembo uses several hundred caliper, piston and disc combinations to achieve maximum performance and optimum brake balance. Calipers are designed with differential piston bore sizes for even pad wear and OEM approved dust boots to protect the pressure seals & uid.<br><br> BREMBO HIGH PERFORMANCE BRAKE PADS Each Brembo system is delivered with preloaded calipers. Brake pads are selected vehicle speci c for high performance. GOODRIDGE STAINLESS STEEL BRAIDED BRAKE LINES Goodridge is the leading line supplier to OE manufactures and championship winning race teams worldwide.<br><br> With the tightest bend radius in the industry and the lowest rate of expansion, you can be assured that every inch of pressure from the pedal is transfered directly to where it counts - the caliper. Goodridge is the only brake hose system approved for use in every country in the world and is guaranteed for life. FLOATING ANTI-RATTLE HARDWARE Designed by Brembo to minimize noise between the oating disc & aluminum hat.<br><br> Allows rotor to expand & contract naturally under extreme temperatures to reduce distortion of the hat & rotor assembly. 13 DRILLED / SLOTTED Both drilled & slotted rotors offer improved initial bite & provide an exit path for water, debris & gases. Some manufacturers offer drilled rotors for performance and an aggressive look.<br><br> Slotted rotors are recommended for extreme conditions & speci cally tted for vehicles with racing pads. OVERSIZED ONE-PIECE ROTORS Incorporates the bene ts of an oversized rotor and application speci c vane geometry for increased brake torque and thermal capacity. VANE GEOMETRY Our discs use three distinctive vane patterns, pillar, straight & curved, to assure maximum air ow & cooling.<br><br> Vane patterns are selected by Brembo Engineers to provide optimum heat dissipation for each application. QUICK RELEASE PAD RETAINING SYSTEM Incorporates anti-rattle feature to eliminate noise and is designed for quick and easy pad changes. OVERSIZED TWO-PIECE cFLOATING d ROTORS Race inspired design reduces unsprung and rotating weight while increasing brake torque and heat dissipation.<br><br> One-piece rotor assembly Two-piece c oating d rotor assembly Most systems available in Red, Silver or Black calipers. Parts are not sold separately. Brembo brake systems are fully compatible with ABS and traction control systems.<br><br> Disc available cross drilled or slotted. 14 107.5146.30 - 107.5146.31 107.4865.80 - 107.4865.80M - 107.8645.16 Galfer HP1000 HP1000 HP1000 130 51,7/48,7 18 Length Heigth Thickness 109 51,5 15 Length Heigth Thickness HP1000 w/sensor Caliper family correspondence A/C/F Caliper family correspondence B/H/P 15 207.9551.13 HP1000 186 57,5 17,5 Length Heigth Thickness XA5.71.M4 HP1000 186 52,5 17,5 Length Heigth Thickness 107.8544.20 - 107.9312.44 Jurid 95,3 57,5 16,7 Length Heigth Thickness HP1000 Caliper family correspondence G Caliper family correspondence J/N Caliper family correspondence M 16 Friction Material Characteristics High Performance HP 1000 OE Bite Friction measured at the beginning of braking action Mean Friction Average level of friction during braking Control Constant and high level of friction Consistency Capability to repeat the same curve of friction stop after stop Pad wear Loss of material (reduction of thickness) Heat Conduct. Thermal conductivity of the material Compresibility Elasticity of the material during compression Bedding Ability to make the disc ready for a right use in short time Fading Reduction of friction level due to the temperature Radar Chart Index 17 WHY DO I NEED TO UPGRADE MY BRAKE SYSTEM?<br><br> A Brembo High Performance Brake system offers many advantages over your vehicles original brake system. Increased diameter rotors and radial mount calipers greatly improve brake system performance, heat dissipation, and reduce brake fade. Aluminum calipers and lighter weight two piece rotors reduce unsprung weight and differential piston bores provide optimum brake balance and even pad wear.<br><br> IS THE BREMBO BRAKE UPGRADE DESIGNED SPECIFICALLY FOR MY VEHICLE? Brembo Engineers design each brake upgrade speci cally for your vehicle and driving conditions choosing from hundreds of caliper, piston and rotor combinations to achieve maximum performance and optimum brake balance. Additionally, Brembo Brake Upgrades are easy to install and are designed to work seamlessly with your vehicle 9s stock master cylinder, ABS and traction control system.<br><br> WILL I NEED OVERSIZED WHEELS AND TIRES? Wheel size and wheel clearance are important considerations when upgrading your brake system. Many new performance vehicles come with larger wheels and tires and can accommodate a Brembo Brake Upgrade.<br><br> Always check with your sales associate to ensure that your wheels provide the clearance and offset necessary to accommodate your new brake system. DO I NEED TO UPGRADE THE FRONT AND REAR BRAKES? Each Brembo upgrade is designed to give you the exibility to upgrade front or front and rear while maintaining optimum brake balance and performance.<br><br> Complete rear systems are available for many applications and are engineered speci cally to compliment the front system. WHAT IS THE DIFFERENCE BETWEEN DRILLED AND SLOTTED ROTORS? Both drilled and slotted rotors provide increased brake system performance.<br><br> They continuously clean and refresh the pad surface, shed water and debris, prevent gas build up, and increase pad cbite d. Drilled discs offer improved ventilation and slotted discs offer increased durability under extreme braking conditions, speci cally when vehicles are tted with race pads. 18 cC d RADIUS cB d RADIUS cA d Wheel Measurement General Note Given dimensions are related to the Brake system.<br><br> Brembo recommends a minimum clearance of 3mm between the caliper and the wheel spoke or rim. Example 1B1.8006A for Chevrolet C5 Corvette - With a straight edge, measure from the middle of the wheel center bore out to 122 mm for the location of the bottom of the caliper. - Now measure down from the straight edge to the back of the wheel spoke for the system 9s cA d measurement.<br><br> This system needs 49mm or more to leave suf cient caliper clearance. Repeat these (two) steps for caliper clearance through to the top of the caliper. 19 BEDDING PROCEDURE It is very important to follow proper brake bedding procedure following installation.<br><br> This is necessary not only for optimum performance of the system, but also to avoid onset of judder (vibration felt through brake and steering). The discs are delivered with a thin zinc coating to prevent corrosion. Prior to beginning the bedding procedure, this plating must be removed from the braking surfaces by driving the car slowly (under 30mph) and performing very light brake applications in order to remove the plating without generating heat.<br><br> With too much heat or pedal pressure, this plating can be deposited unevenly on the disc, and impregnated into the pad, further increasing the likelihood of judder development. Once a visual inspection of the braking surfaces con rms that the plating has been evenly removed, begin with the bedding procedure as speci ed below. " Drive vehicle to a remote area and perform at least 30 brake applications of 3 second duration.<br><br> Use light/ medium deceleration with varying starting speeds. Leave at least ½ mile between each brake application " The purpose of this procedure is to gradually increase the temperature in the components without thermal shock, and to mate the brake pad and disc friction surfaces " After the repeated stops, drive the vehicle for several miles with little or no braking in order to adequately cool the components " The system is now ready for normal use NOTE: This entire procedure must be complete before driving the vehicle as normal. It is especially important that this process is completed before any extended same-speed driving is done (i.e.<br><br> freeway travel). Failure to follow these instructions greatly increases the likelihood of judder development. NOTE: After installation or bleeding of the brake system, ush any brake uid from around the bleed screws, etc, using soapy water.<br><br> Over time, brake uid trapped in these areas may cause paint damage. Additionally, do not use acidic wheel cleaners when washing your vehicle, as they can cause damage to the caliper nish and aluminum disc mounting bells, as well as to the wheels themselves. Use only soap and water when cleaning wheels or braking components.<br><br> 20 BREMBO S.p.A. ( cManufacturer d) warrants to the original user that this Product complies with Manufacturer 9s published speci cations and is free from manufacturing defects in materials and workmanship (a cCovered Defect d). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.<br><br> In the event that a Covered Defect is claimed, a claim under this Limited Warranty must be made within sixty (60) days from its discovery and within two (2) years from the date of purchase, or within such longer period required by law. If the Product is found to have a Covered Defect, the Product will be, in the Manufacturer 9s sole judgment, either repaired or replaced by a new or rebuilt Product. THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY MADE WITH REGARD TO THIS PRODUCT AND IS MADE IN LIEU OF ALL OTHER WARRANTIES WHETHER ORAL OR WRITTEN.<br><br> ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. MANUFACTURER SHALL HAVE NO LIABILITY FOR INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER AND IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY DAMAGES IN EXCESS OF CLAIMANT 9S PURCHASE PRICE FOR THE PRODUCT. For products sold in the U.S., some states do not allow the exclusion or limitation of incidental or consequential damages, so one or more of the above limitations or exclusions may not apply to you.<br><br> This Limited Warranty gives you speci c legal rights, and you may have other legal rights which vary from state to state. All claims under this two year Limited Warranty must be made in writing within sixty (60) days following the discovery of the alleged Covered Defect, and the claimed defective Product or defective part(s) must be returned to BREMBO S.p.A. at Via Brembo 25 - Curno (BG) - Italia, through the distribution chain and postage prepaid, within the two year warranty period, or within such longer period required by law.<br><br> A statement of the defect must be included with the Product or parts returned, and proof of purchase by the original user identifying the Product and date of purchase (whether purchased at retail or sold by a dealer as part of the installation of the Product) must also be included. This Limited Warranty does not apply to: - any damage to the Product caused in whole or in part by abuse, accident, re, chemical corrosion, use for other than its intended purposes, unlawful use, use in a model for which it was not designed, faulty installation, installation contrary to the Manufacturer 9s published instructions, or failure to maintain the Product in accordance with the Manufacturer 9s published instructions; - claims of comfort, noise, vibration or harsh riding characteristics. This Limited Warranty sets forth the sole liability of Manufacturer hereunder, and it may not be changed by any dealer, distributor or other person.<br><br> The Product has been designed and manufactured for the speci c model and application indicated in Brembo HP brake upgrades catalogue and/or at Brembo Product 9s distributors, both available on Brembo 9s website (www.brembo.com). The Product shall be used in compliance with laws and rules in effect in the states and/or countries in which the vehicle in which the Product is installed will be operated, including but not limited to compliance with the applicable traf c rules and obtaining any prior necessary authorization/homologation, approval or license in such states and/or countries. The Manufacturer is relieved of any and all damages, claims and liabilities in case the use of the Product does not comply with such applicable laws and regulations.<br><br> This Limited Warranty shall be governed, construed and interpreted in accordance with Italian Law. 21 IV www.brembo.com Brembo North America 15300 Centennial Drive Northville, MI, 48168 Race Technologies 1590 Sunland Lane, Costa Mesa, CA 92626 Tel: 714-438-1118 - Fax: 714-438-1119 www.racetechnologies.com Distributed by

less