2010 Chevrolet Camaro SS

To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.

Please login or register to make a comment!

Use supplied hardware and attach per illustration below (Fig A). Start by placing the supplied 10-24 x 2 d phillips head bolts through the mounting tabs in billet grille. Next very loosely attach the wing portion to the 10-24 x 2 " bolt.

2010 Chevrolet Camaro SS Bumper Grille 1 Place billet grille into opening and center. Turn the wing portion of the toggle cHORIZONTAL d, so that it passed through the stock plastic opening in stock grille shell. With billet grille in place use a regular screwdriver and rotate the wing portion of the toggle bolt cVERTICAL d so that it catches the plastic in stock grille shell.

Loosely tighten toggle bolts. Repeat process for remaining toggle bolts. Make any necessary adjustments.

Fully tighten without over tightening bolts. Completed Installation for main upper grille. 2 PART# 44601 (Brushed) 44602 - (Polished) 44603 - (Black) Bumper Grille Hardware 4 - 10-24 x 2" Toggle Bolt Assemblies Completed Installation For installation of billet grilles that require cutting of the stock shell, proper tools, knowledge and skill are needed.

Carr iage Works is not responsible for care & accuracy of the instal- lation, only for Fit & Finish of its products. Use a quali ed installer ... more. less.

or contact original vendor for references to complete all instructions. NOTE: Please adjust horizontal blades if irregular.<br><br> This is the result of shipping and handling outside of Carriage Works con trol. Also Carriage Works Recommends applying a high quality automotive wax to maintain the original appearance. Fig A<br><br>

less