VW / Audi Timing Tools

and while setting timing. Also for AAZ engine. Diesel Dial Gauge Adapter - 2066S Use to check and adjust injection pump timing.<br><br> Includes extension for later AAZ and ALH pumps. VW & Audi Diesel Timing Tools Engines: 1V, 1Z, AAB, ACV, AHU, ALH, AWP, AWV, CS, CY, DE, MD, ME, MF T10060A T10060A - AEB, AEG, AHA, AKB, AMB, APB, APH, ART, ATQ, ATW, AUG, AUX, AVH, AWD, AWM AWN, AWP, AWV, AWW, AYS, AZG, BBD, BBW, BCY, BDC, BEV, BEW, BFM, BKF, BNU Applications: Belt Tensioner Lock Pins Use to lock tensioner of ribbed V belts during replace- ment or adjustment. Use with #3242, #3243 and #3391.<br><br> THIS TOOL REPLACES #3204 Holds crankshaft at TDC (top dead center) when remov- ing and installing toothed timing belt or 5ywheel/drive plate. Crankshaft Locking Pins 3242 T40026 T40026 - AUDI - AVK (2000-2004) 3242 - VW - AHA, ATQ, BCY & BDP AUDI - AAH, AFC, AHA, AKB, ART, ATQ, AUX, AVK, AWN, AYS, BBD, BCY, BEL, BFM, BHF, BNK & BSB Camshaft Lock Bars, Timing and Lock Pins Tensioner Lock Pin - T03006 Use to lock chain tensioner on 3.2L V6 engines. VW - Jetta 2005- Engine: BGP, BGQ Camshaft Holder - V8 8/99 - 2006 Use with #T40011 and #3242.<br><br> Audi A6, A8 Engines AKB, AUX, AYS, ART, AWN, BBD, BCY & BFM 1998-2003 3243 3243 - Audi 90, A4, A6 1994-97 Engine: AFC Twin Camshaft Holders V6 & V8 3391 3391 - Audi A4, A6, VW Passat V6 5 Valve 1998-2005 Engines: AHA, ATQ, APB & BEL Use to align camshafts at TDC during timing belt chang- es or cylinder head reassembly. Use with #T10060A and #3242. T40005 Belt Tensioner Lock Pin - T40011 Use to lock belt tensioner on non adjustable types.<br><br> Set of 3. Engines: AHA, AKB, APH, ART, ATQ, AUG, AUX, AVK, AWD, AWM, AWN, AWP, AWV, AWW, AYS, BBD, BCY, BDP, BKF, BNU, BSB Used when dismantling and assembling camshafts on Audi Q7 2006> 8-cyl. injection engine, 4.2L, FSI T40116 CAMSHAFT LOCATING PIN Tensioner Lock Pin - T40098 For locking toothed belt tensioning element.<br><br> AUDI - 4-cyl. petrol direct injection 2.0 ltr. turbo 4V engine Vibration Damper Lock V8 - 3211 Hold crankshaft vibration damper when adjusting timing.<br><br> Use with 3199, 3204, V159. Audi V8 Engines: ABH, PT 1989-94 Crank Pulley Wrench - 2079 Removes and installs crankshaft pulley nut on all 5 cylinder engines while in car. Use with 2084, 3197 or 3256.<br><br> VW - Fox, Quantum Audi - 4000, 5000, 100, 200, S4, S6, A8, V8 35mm - #3203 Removes front crankshaft (pulley) seal at the vibration damper. See seal installer 3202 and 2003/3. VW & Audi late models.<br><br> 35mm Long Body - #3240 Removes left and right front camshaft oil seals. Use with 2085/1 to remove left rear camshaft seal. VW VR6, Audi V6 32mm - #2085 Removes crankshaft (early), camshaft and cam position sensor seals.<br><br> Use with 10-203, 3202, 3203, 3240, 3241 & T10071. VW & Audi - All engines except diesel. Pulley Seal Installer.<br><br> - #3202 Installs front crankshaft pulley seal. VW Passat, Audi A4, A6, A8 Engines: AAH, AFC, AHA, ATQ, AVK, APB, ABZ, AEW Oil Seal Driver - #10-203 Installs crankshaft pulley, camshaft intermediate shaft oil seals. 4 piece set.<br><br> VW & Audi Engines 1982 and newer. Cam Seal Installer Kit - #3241 Use to install seal(s) into camshaft on models 1991 and newer. 3273 2084 3273 - VW VR6 1992-97 Engine: AAA 3197 - Use with #2079.<br><br> Audi A8 1996-1999 Engines: ABZ & AEW 2084 - Use with 2079. Use #3256 for 7/91 and later models. Audi - All 5 cylinder models up to 6/91 production.<br><br> Vibration Damper Locks Locks crankshaft pulley to facilitate removal of damper bolt on 5 and 6 cylinder models. 3197 Torque Wrenches For Timing and Belt Replacement VAG1331 - TORQUE WRENCH 6-50Nm Inserts 9X12mm VAG1332 - TORQUE WRENCH 40-200Nm Inserts 14X18mm VAG1410 - TORQUE WRENCH 4-20Nm Inserts 9X12mm These torque wrenches are escential for proper belt ten- sioning, timing and engine assembly. Vibration Damper Locks, Cam and Crankshaft Seal Tools SEAL PULLERS SEAL INSTALLERS OIL Seal Driver - #T10053 Guide sleeve and compression sleeve for install- ing the crankshaft sealing ring.<br><br> Used on diesel 3 & 4 cyl. Diesel engines with pump injector. #T40019 Used when replacing crankshaft oil seal.<br><br> VW BELT TENSION PIN WRENCH - V159 Use to adjust tensioner on models with small pulley (early type). See pin wrench #3387 for later large pully type. Engines 1982-1997.<br><br> Belt Tension Pin Wrench - 3387 Use to adjust tensioner on models with large pulley (later type). See pin wrench #V159 for early small pullely type. 1.8 and 3.0L engines.<br><br> BELT TENSION PIN SOCKET - T40009 Use to set belt tension on late model V6 and V8 engines. Use with torque wrench VAG1410 and VAS5122. Audi - A6 & A8 Engines: AKB, AUX, AYS, ART, AWN, BBD, BCY, BFM Cam Chain Tensioner Retainer - 3366 Use to holdthe chain and tensioner in position during assembly and disassembly.<br><br> AUDI - AEB, AHA, AKB, AMB, AMU, APB, ART, ATC, ATQ, ATW, AUX, AWM, AWN, AWP, AYS, BBD, BCY, BEA, BEL, BFM VW - AAA, AEB, AHA, APH, ATW, ATQ, AUG, AWM, AWP, AWV, BKF, BNU Timing Belt Tension Cam Service Tools Use this special puller to remove the camshaft sprockets on a variety of VW and Audi camshafts. Includes 17mm and 23mm pulling arms. Same as #T40001.<br><br> Replaces #3032. VW & Audi Engines: AEB, AHA, AKB, ALH, APB, APH, ART, ATC, ATQ, ATW, AUM, AUX, AUG, AWD, AWM, AWN, AWP, AWV, AWW, AYS, BBD, BCY, BFM Camshaft Sprocket Puller Belt Tension Tester - AS4395A Universal application identi4es proper belt tension. Allows test- ing of belts to determine whether replacement is necessary or new belt tension is correct.<br><br> Universal Cam Holding Tool #AS4394 Perfect for holding cam while inserting or removing locking pins. Viscosity Fan Spanner - #3212 Use to remove and install the viscous clutch on radiator fan and central hydraulic pump pulley. AUDI - A4, A6, A8 VW - Passat Engines: AHA, ATQ, AKB, AUX, AYS, AEW, APB, AVK, ART, AWN, BCY, BFM, BKH Viscosity Fan Wrench - #3312 Use to loosen and tighten viscosity fan clutch.<br><br> AUDI - A4, A6, A8 VW - Passat Engines: AHA, ATQ, AKB, AUX, AFC, AYS, AEW, APB, AVK, ART, AWN Coolant Pump Wrench - VAG1590 Use to loosen and tighten bolts on cool- ant pump pulley. VW - Golf, Jetta, GTI, Passat Engines: AAA, ACC. Ribbed Belt Tensioning Wrench - #3299 Use to hold V belt tension when removing and installing V-belt.<br><br> VW - Golf, Jetta, GTI, T4 1991-1999 Audi - A6 Engines: 1Z, AAB, AAZ, AAF, ABA, ACC, ACU, ACV, AHU, AVK T40001 #T10066 HALDEX CLUTCH FILTER WRENCH Used when detaching & tightening the oil 4lter of the haldex clutch. O2C and 02M transmission. BELL HOUSING SOCKET Used for removing/installing bolts from engine to gearbox.<br><br> 09A/09B 5-speed automatic gear- box. Used for removing/installing connecting link. Used when removing and installing drive axle #T10099 XZN SOCKET 18mm #T10162 Used for removing and installing the wheel bearing/wheel hub unit, rear axle.<br><br> AUDI 3.0L- AVK, BBK Crankshaft Locking Pin Holds crankshaft at TDC (top dead center) when removing and install- ing toothed timing belt or 5ywheel/ drive plate. # T40026 - AUDI - AVK (2000-2004), BBK CAMSHAFT ADJUSTER SOCKET Special groove nut socket to turn the camshaft adjuster into position. # T40028 - AUDI - AVK (2000-2004), BBK Camshaft Adjustment Gauge Set - 3.0L V6 Use to lock and hold camshafts when asjusting the left and right camshafts.<br><br> Set of 2. #T40030 Audi - A4, A6 2000-2004, 3.0L- AVK, BBK WHEEL HUB BOLT SOCKET VOLKSWAGEN/AUDI TOOLS #1117J Compresses all types of MacPherson style coil springs front and rear. Includes three sets of jaws (2) for 75-110mm, 110-140mm and 140- 190mm springs found in most vehicles with Macpherson struts.<br><br> Not designed for use with impact wrench . Spring Compressor Kit Wheel Bearing Removal & Installing Kit #B90T Use to remove front and rear wheel bearings on most vehicles. Our best coverage yet.<br><br> #B9059M Master Radio Removal Tool Kit 46 Pieces Domestic & Imports. Kenwood II 1998-2001 & III (ab 2002) Sony I since 2001 & II ab 2002 Pioneer & JVC Panasonic to 2005 & from 2006 Mercedes Benz & BMW Clarion - New & Old Fiat Brava Opel (GM) Blaupunkt, Grundig, (VW, Audi, Ford) Blaupunkt - New (since 2002) BMW Becker - VW, Audi, Mercedes Benz, Porsche, Becker - New (since 2002) VW BMW, Opel - w/Linbus Skoda - New (since 2002 #OBD2-500 Quick Scan OBD-II Fault Code Reader VOLKSWAGEN TOOLS Wider vehicle coverage with CAN Protocol support Displays DTC 9s / Generic Codes P0, P2, P3, U0 and Manu- facturer Speci4c Modes P1, P3, and U1 Reviews OBD2 monitor and I/M Readiness Status Retrieves VIN (Vehicle Identi4cation No.) on 2002 and newer vehicles that support Mode 9 Resets Check Engine Lights Determines the malfunction indicator lamp (MIL) status Displays Total # of Codes Retrieved Identi4es and Displays Pending Codes Code De4nitions Displayed on unit Screen Detects OBD-II Freeze Frame Information Displays O2 Sensor Test View live engine data parameters (PIDs) Internal 9 volt battery stores latest test results for off-car review and analysis Unit can be 5ash updated with a standard Windows PC via USB Includes comprehensive P1XXX Mfg. Speci4c codes manual.<br><br> " " " " " " " " " " " " " " " " Includes: " Terminator Probe " Ground cable " Extension Cord " extra Probe tips " Storage Box The Terminator is a superior Logic probe combining the features of a DMM and oscilliscope but simplifying the display for technicians that want to 3nd the pulse but don 9t need the to see the trace. B7205J Reads: " Voltage " Frequency " Duty Cycle Ideal for CAN Bus diagnostics THE TERMINATOR The MaxiScan VAG405 code scanner is an OEM level diagnostic scan tool for most VW/Audis sold worldwide since 1990. Accurate, reliable and easy to use, the MaxiScanTM VAG405 is a time saver and a money maker.<br><br> Features & Bene4ts Ï Works with Volkswagen, Audi, Seat, Skoda sold world - wide since 1990 Ï Reads and erases Diagnostic Trouble Codes (DTCs) of engine, ABS, airbags, transmission, radio, climate control(A/C), cent. elect., steering wheel, instruments, immobilizer, etc. (18 Systems) Ï Reads and clears generic trouble codes of cars using ISO 9141-2 ( cCARB d), ISO 14230 ( cKWP-2000 d) and ISO-15765 ( cCAN d) protocols.<br><br> Ï Turns off MIL lights of engine, airbags, ABS , A/T and most other systems Ï C.A.N.(Controller Area Network) capability Ï Resets oil service light Ï Retrieves vehicle information (VIN) Ï Displays I/M Readiness Status. Ï Displays DTC de4nitions on unit screen Ï System upgradeable via internet Accessories Ï User 9s Manual Ï OBD II cable Ï USB cable Ï Carry case iSCAN-VASS VAG405 VAG MASTER " Live Data " Fault Codes " Controller Id " Readiness Codes " Component Activation " Live Data Graphs " Service Interval Reset " Direct Pc Interface " Coding and Programming " Can Diagnostics (Slow & Fast) Complete VAG Scanner for all systems and proto- cols used in VAG vehicles. Volkswagen Audi Seat Skoda VOLKSWAGEN/AUDI DIAGNOSTICS NEW for 2008 VOLKSWAGEN COIL PULLERS BAUM TOOLS UNLIMITED INC.<br><br> 941-927-1414 Intnl d 941-927-1612 Fax PO Box 5867 Sarasota FL 34277-5867 http://www.baumtools.com / sales@baumtools.com 800-520-9757 VOLKSWAGEN COIL PULLER KIT VAG-CPK This kit contains all the ignition coil pullers for servic- ing inegrated coil, powerstage sparkplugs. Includes: #T10166, #T10094A, #T10099A and #T40039 #T10166 #T10094A #T10095A #T40039 VW Polo,golf 1.4, 1.6i Caddy 1.4i, Bora 1.4L, 1.6L, Passat, Touran 1.6L Phaeton, Transporter T4. 5 And 6 cyl ,VW golf, bora, 4 and 5 cyl.<br><br> VW Passat, 6 cyl, Sharan, Touareg, Phaeton VW 8 and 12 CYL AWA,ASN,BBK VW 8 and 12 CYL AWA,ASN,BBK

less