Accura®Xtreme Plastic

To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.

Please login or register to make a comment!

Get extreme performance and durability with Accura® Xtreme Plastic. APPLICATIONS " Form, fit and function prototypes " Durable Assemblies " Snap fit assemblies " Tough enclosures " Consumer electronic components " Master patterns for RTV/Silicone molding " Replace CNC machining of Polypropylene and ABS FEATURES " Look and feel of a durable molded plastic " Outstanding durability and impact resistance " Thermal Resistance over 60 ° C " Easy to use low viscosity formulation " Fully developed and tested build styles BENEFITS " Increased application opportunities " Suitable for assemblies and functional testing " Prototypes withstand modest temperatures without distortion " Faster recoating and build times " Maximize reliability with no user R&D 3D SYSTEMS CORPORATION TRANSFORM YOUR PRODUCTS Accura ® Xtreme Plastic for use with solid-state stereolithography (SLA ®) systems 3D Systems Corporation Tel: 803.326.4080 moreinfo@3dsystems.com 333 Three D Systems Circle Toll-free: 800.889.2964 www.3dsystems.com Rock Hill, SC 29730 U.S.A. Fax: 803.324.8810 NASDAQ: TDSC Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating con ditions, material combined with, or with end use.

3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantabilit y or fitness for ... more. less.

a particular use. © 2007 by 3D Systems, Inc. All rights reserved.<br><br> Specifications subject to change without notice. Xtreme, EXACT and FAST are tra demarks, and the 3D logo, Accura and SLA are registered trademarks of 3D Systems, Inc. PN 70714 Issue Date - 10 Sep 07 Accura® Xtreme Plastic For use with solid-state stereolithography (SLA ®) systems TECHNICAL DATA Liquid Material MEASUREMENT CONDITION VALUE Appearance Grey Liquid Density @ 25 °C (77 °F) 1.13 g/cm 3 Solid Density @ 25 °C (77 °F) 1.19 g/cm 3 Viscosity @ 30 °C (86 °F) 250 - 300 cps Penetration Depth (Dp) * 4.1 mils Critical Exposure (Ec) * 11.7 mJ/cm 2 Tested Build Styles EXACT" Post-Cured Material MEASUREMENT CONDITION METRIC US Tensile Strength ASTM D 638 38 - 44 MPa 5510 - 6380 PSI Tensile Modulus ASTM D 638 1790 - 1980 MPa 260 - 287 KSI Elongation at Break (%) ASTM D 638 14 - 22 % 14 - 22 % Flexural Strength ASTM D 790 52-71 MPa 7540 - 10300 PSI Flexural Modulus ASTM D 790 1520 - 2070 MPa 220 - 300 KSI Impact Strength (Notched Izod) ASTM D 256 35 - 52 J/m 0.66 - 0.98 ft-lb/in Heat Deflection Temperature ASTM D 648 @ 66 PSI 62 °C 144 °F @ 264 PSI 54 °C 129 °F * Dp/Ec values are the same on all solid-state laser SLA® systems.<br><br>

less