Fantasy Film Dragonfy Directions: Ink dragon;y stamp with black ink. Set stamp on table with inked rubber side up. Place three layers of :lm gently on stamp sur - face.
Without moving the :lm, cover it with a Te;on ironing cloth or baker 9s parchment paper. Press, press and iron for 3 seconds on the entire surface of stamp. Too much dwell time will burn the :lm.
Peel :lm off stamp surface. With stamped surface facing up, apply glue and Heather glitter to head, body and circles in lower wings . Apply glue and Miss Muffet glitter to body and wings.
Glitter rest of wings with other colors as shown in photo. Let dry for several hours. Cut closely around dragon;y up to, but not the black lines.
Cut in between wings up to the thorax. Crease at thorax and bend wings up. For a double winged dragon;y: make two dragon;ies, one with glitter, one without.
Glue the bodies together with the glittered one on top. Add strength and body by placing some Art Glitter Fantasy Fiber in-between Film sheets before heat bonding. Your beautiful Fantasy Film and Art Glitter dragon;y can be glued with Designer Dries Clear Adhesive to a card, magnet, or pin ... more. less.
to wear on clothing.<br><br> Or anywhere it can ;utter! Materials: " Clear Fantasy Film or color of choice, cut to three 4 d x 3 d layers " Ultra6ne Opaque Glitter: 115 Heather " Ultra6ne Transparent Glitter: 144 Miss Muffet, 91 Orange Crush, 146 Bonnie Blue, 97 Nirvana " Baker 9s parchment paper " Barbara 9s Large Dragon7y rubberstamp " Permanent black ink pad " Te7on coated Iron set to medium-high heat " Designer Dries Clear Adhesive with Ultra6ne Metal Tip attached " Scissors Art Institute Glitter, Inc. 720 N.<br><br> Balboa Street, Cottonwood, AZ 86326 Toll Free: 1-877-909-0805 or 928-639-0805 www.artglitter.com firstname.lastname@example.org Create luminous effects that will enhance all your paper and fabric projects by making your own sheets of dazzling Fantasy Film fabric! Stamp it, heat it, cut it, sew it, or wash it! INSTRUCTIONS FOR CREATING FLAT SHEETS: Set Te:on coated iron to medium or polyester setting.<br><br> Place three to four layers of 9lm on parchment paper. Lay another piece of parchment or non-stick pressing cloth on top. Press with iron 9rmly for 3-10 seconds.<br><br> Lift parchment to reveal a totally unique sheet of fabric! The more layers you melt together, the stronger the fabric sheet. You can die cut it, use a hand punch or scissors.<br><br> Soon you will be able to predict the outcome of the bonding procedure, allowing you to create colors and textures you never dreamed of before. 3-DIMENSIONAL BONDING: Try using a heat tool, candle :ame or soldering iron. Crunch 9lm into a shape, like a heart.<br><br> Use tweezers to hold while heating. Bring 9lm close to heat source until it has melted into the desired shape! Be careful not to over heat.<br><br> Soldering iron works well for melting holes in :at, heat-bonded 9lm sheets. CREATE TEXTURE: Create interesting patterns by 9rmly heat pressing three layers onto an un-inked art rubberstamp or another textured surface such as lace with parchment paper between 9lm and iron. Stamping directions on reverse side.<br><br> SHAKER POCKETS: Fold and crease a layer in half. Iron three edges 1/4 d. cSandwich d materials in-between sheets, such as: copies of photos, glitter, 9ber or any organic material.<br><br> Iron shaker pocket shut. Press :at or leave items loose. IMPORTANT INFORMATION: Too much heat/dwell time/pressure will cause 9lm to become more coppery, or a loss of color may occur and 9lm may bubble or melt away.<br><br> Colors change with heat. Fantasy Film and Fiber fuses to itself and to each other only. Use with Art Glitter and/or Fantasy Fiber for endless possibilities!<br><br> Art Institute Glitter, Inc. 720 N. Balboa Street, Cottonwood, Arizona 86326 Ph: 928-639-0805 Fax: 928-639-4699 email@example.com www.artglitter.com Fairy wings, collages, cards, scrapbooks, 9ne art, quilts, clothing and more!<br><br> F an t asy Film