CNC Training: Training and Programming on the PC

To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.

Please login or register to make a comment!

sinutrain CNC Training: Training and Programming on the PC 2 Highly-qualified personnel are a decisive success factor in the metalworking industry 3 now more than ever. This results in a high degree of responsibility for you as teacher or instructor, since it is your task to convey the corresponding expertise 3 through optimized, practice-oriented training. This is especially true when it comes to CNC manufacturing, where the market requirements with regard to quality, adherence to deadlines and variety of variants are increasing continuously.

Innovative, efficient and holistic solutions are demanded 3 solutions with which the trainees can be optimally prepared for their task quickly and efficiently. SINUTRAIN® from Siemens fulfills all of these requirements. Future-oriented CNC training: SINUTRAIN Optimally prepared for the workshop: efficient training on the PC With SINUTRAIN we offer a practice-oriented and integrated solution for CNC training 3 across all training levels.

From the basics all the way to final qualification: SINUTRAIN permits you to efficiently convey your knowledge of the functions of the highly innovative CNC controller features. Our holistic training solution comprises training software and training systems 3 perfectly tailored to your require- ments. The highlight: SINUTRAIN is a training system that is identical to a control ... more. less.

system. The NC kernel and the operator interface of the control systems SINUMERIK® 802D/810D/840D and 840Di, which have been tried and tested worldwide, are used. Thus all languages of the control system can be used. This means that on the PC trainees can simulate and learn exactly those operational steps they are going to implement on the machine in the future. This facilitates training considerably: it becomes more efficient and significantly more cost-effective. Many training centers prize SINUTRAIN exactly because of this high degree of functionality and operational reliability 3 as excellent solution for basic and advanced training. 3 Practice-oriented and perfectly tailored to different training levels: SINUTRAIN Specialist Training Programming Operation Basic Information SINUTRAIN Multimedia learning software 4 The perfect introduction to the CNC world Interactive learning concept with multimedia software To learn the basics, self-learning is still one of the most effective methods for developing know- how 3 provided the right documentation is available. We offer an interactive learning concept for handling CNC machines that meets the requirements of both beginners and skilled workers: a layout that arouses interest, graphically sophisticated learning software and training docu- mentation in six different languages. More languages will soon be available. With this training material, all CNC functions of a machine can be trained 3 flexibly, reliably, quickly and cost- effectively. Ideal for beginners: simple and intuitive Basis of our groundbreaking training concept is the multi- media training software. The programming tool was tailored to the high-performance SINUMERIK 810D/840D and is perfectly suitable for self-learning and Computer-Based Training (CBT) 3 also with virtual machines 3 thanks to its simple structure and user-friendly operator interface. Even complex geometries can be entered and processed quickly and easily. The graphic symbols are easily understood and turn programming into child 9s play. 5 digita Deutscher Bildungssoftware Preis 2002 Just like in the actual workshop: the complete learning process To make it easier for beginners to learn the machine func- tions, the software includes a typical milling or turning machine as a virtual machine. Since the machine can be stopped as required, the trainees can optimally familiarize themselves with details such as control, working range and tool changing. The software permits the trainee to generate machining plans, to learn how to proficiently work with coordinate systems and how to manufacture simple and complex workpieces. Tools are displayed true to original and support with the entire learning process during the animation. Invalid inputs have the same consequences as they would have in an actual workshop: Tools break, the tool edge plate gets too hot or breaks. In other words: The entire learning process is just like in creal life d and thus particularly effective. With tests the trainees themselves can then verify their new skills. The participant can even print out a certificate as tangible proof of successfully concluding the further training. Awarded: new training methods At the Bildungsmesse 2002 in Cologne (expo on education), Siemens was awarded the first prize cdigita 2002 d in the category cBasic and further training, specialist training d for its multimedia CD ShopMill / ShopTurn 3 as cpath-breaking multimedia learning system &, presenting new forms of shopfloor-oriented training. d The advantages at a glance Learning of the basics with simple multimedia examples Easy, logical familiarization with CNC programming The learned skills are put to immediate use at the machine, since its operator interface is automatically being learned as well Graduated introduction to abstract DIN programming 3 first through csmall DIN supplements d, then complete DIN sentences Familiar DIN training with control-identical layout 6 Learning and mastering technology: Basic and advanced training with SINUTRAIN Because of the ever-increasing complexity of training requirements, comprehensive turnkey solutions are demanded for CNC training systems. We serve this need 3 with SINUTRAIN. Software and hardware, a completely equipped training classroom or integrated training center: With SINUTRAIN we offer you a complete range of optimized solutions for efficient CNC training 3 perfectly matched to your specific requirements. If you want to continue to use existing machine tools, we retrofit them for you 3 that is our special retrofit service. Optimally adapted to training: the software SINUTRAIN/Jobshop is the control-identical CNC training software on CD-ROM. It is available in many languages, runs on a PC and is optimally suited for control-identical training. It provides a high degree of practical experience. With SINUTRAIN NC programs can be developed and simulated based on the programming language DIN 66025. These programs can also be used with real machines. The connection to CAD systems makes program generation even faster. Particularly practical: we can assist you in adapting the software to a training system as well as during installation and introduction. Thanks to training and teachware, it is very easy for the instructors to familiarize themselves with the software. Tailored to your requirements: from the training classroom to the training center SINUTRAIN allows the instructor to intervene in the training concept whenever necessary 3 right from their training workstation. Thus you can detect problems without delay and take calculated measures to control the learning processes. Student and instructor workstations can be connected over a didactic network: Your PC thus becomes the cdirector 9s chair d for CNC training. You can view the screen contents of your students 9 workstations or generate screen contents centrally. You can also assume full control over and operate the PC workstations of your students. An integrated training center is created by networking the student and instructor workstations as well as the machine tools with each other. The training programs can then, for example, be transferred from the student workstation to the instructor workstation and from the instructor workstation to the machine tools. If data are to be transferred from the PC to the machine, SINUTRAIN must be adapted to existing machine tools. We offer this adaptation as a service. Just like a real controller: the SINUTRAIN training keyboard The SINUTRAIN keyboard layout is identical to the original keyboard layout on the machine control panel. Every key is at the same location as already known from the con- troller or as described in the manual. This facilitates the first training sessions and makes learning of operation and programming even easier and more realistic. The keyboard is easily connected to the PC over the USB interface 3 without additional hardware and without external power supply. The advantages at a glance: First steps on the PC with control-identical software DIN-compliant programming and ShopMill/ ShopTurn programming Simple programming with integrated online help Trainee locations can be linked to form a didactic network Optional linking to a CAD system for rapid program creation Student workstation Student workstation Student workstation Instructor workstation Machine tool Didactic network Ethernet network 7 Siemens AG Automation and Drives Motion Control Systems P.O. Box 3180 91050 ERLANGEN GERMANY The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. Want more information? Contact your local Siemens office or: Siemens AG Automation and Drives Matthias Heiser Product Management Erlangen Phone: +49 (0)91 31 98-39 23 Fax: +49 (0)91 31 98-13 03 E-mail: matthias.heiser@siemens.com Subject to change without prior notice | Order No. E20001-A650-P610-V1-7600 I DISPO 06311 | 2105C6179 MK.MC.10.STAN.52.7. 04 WS 02075. I Printed in Germany I © Siemens AG 2007 www.siemens.com/sinumerik/training

less